H 7 H10

H 7 / H 10

Compact Design

Technical specifications

Modell H 7 H10
X-Axis (mm) 7501.020
Y-Axis (mm) 600700
Z-Axis (mm) 500
Distance from spindle nose to table (mm) 150 - 650180 - 680
Distance between columns (mm) 8501.080
Table working surface W x D (mm) 810 x 6201.050 x 700
Load max. (uniform distribution) (kg) 500800
T-Slots (DIN 650) 5 x 18 x 1256 x 18 x 125
Type BBT 40/ BBT 50/ HSK 63 A / SK 40 / SK 50
Propulsion method Direkt
Spindle Speed (rpm) 15.000
Power in kW (cont. 30 min.) 10/1410 / 14
Spindle Taper 63,7/89,463,7 / 89,4
Feed Rate
Rapid Traverse (m/min) 30 / 30 / 30
Cutting Feed Rate (mm/min) 20
ATC & Magazine
ATC Type Trommel
Magazine Capacity 2430
Maximum Tool Diameter (mm) full / next pocket empty 7575 / 120
Maximum Tool Length (mm) 300
Maximum Tool Weight (kg) 7
Space & System Requirements
Air Requirements (bar) 6
Electrical Power Consumption (kVA / A) 50 / 72
Machine Net Weight (kg) 7.0009.100
Maximum Floor Spade (mm) W x L x H 3.530 x 4.220 x 2.7604.520 x 4.290 x 2.830
Modell H 7 H10


Standard Optional
Linear Scales Oil mist device
Spindle thermal compensation system Oil mist collector
Chip flushing Ballscrew cooling system
Spindle cooling Part probe measurement system
Heidenhain iTNC 640 Control Touch probe for tool measurement
15,000 RPM, CAT/BT40, inline spindle Rotary table (4th/5th axis)
24T arm type ATC (H7)

General Infos

High-rigidity and high-precision mechanical structure

  • Main mechanical structures, such as: base, column, saddle, etc., are made of Meehanite casting iron with the process of heat treatment to release the residual stress to ensure every actual miniature movement and to maintain a long-lasting accuracy.
  • Box-shaped structural design on beam, together with ladder-like layout of linear guideway makes the combining span of saddle wider and assures a powerful and stable machining capability on the spindle.
  •  The design with 3-axis roller-type high-precision linear guide-ways acquires a quick response in acceleration and deceleration and gets the rapid traverse up to 32 m/min.
  •  3-axis ballscrews, being pre-stretched, can effectively refrain from the thermal deformation and surely guarantee the precise positioning accuracy and repeatability accuracy.
High-rigidity and high-precision mechanical structure

No-counterbalance design on headstock

  • The no-counterweight structural design on headstock is without stagnant phenomenon caused by inertia and no vibration resulted from the counterweight, but with the agile, quick and stable response in feed.
  • Z-axis linear guideway with 6 blocks ensures good accuracy in long-term operation and long service hours.
No-counterbalance design on headstock

High-precision and high-performance spindle

  • Embedded automatic thermal compensation appliance (Opt. on IBAG spindle) can effectively refrain from the thermal deformation and surely guarantee the accuracy.
  • The cooling system on the spindle makes sure the temperature stability in spindle operation and restrains from the thermal deformation on the spindle to optimize the machining accuracy.
High-precision and high-performance spindle

Chip flushing function and oil-skimmed design

  • The inclined-plane design on the chassis, together with the flushing coolant system on both rear sides, makes chip removed effective.
  • Oil-skimmed design – the water tank with oil skimmer makes the service life of coolant longer.

Automatic Tool change

  • 20-tool, umbrella-type, tool magazine
  • 30-tool, cam-type, tool magazine, optional

Heidenhain Control iTNC 640

  • Unsere Takumi Portalbearbeitungszentren sind mit der neuesten Version der Heidenhain Steuerung iTNC 640 ausgestattet.
Heidenhain Control iTNC 640

We are here for you.

Use our contact form, send an email or just call us!
Start inquiry